At the table beside the closing paperwork, a buyer notices the bold-faced radon paragraph in the Colorado residential contract. The state brochure arrives with it. The paragraph is required, but it doesn’t mean anyone has tested this particular home or that the buyer knows what the disclosure commits the seller to provide.
Radon is a radioactive gas that comes from uranium in soil. It’s the second leading cause of lung cancer nationally and the leading cause among people who’ve never smoked. About one in every two Colorado homes tests above the Environmental Protection Agency’s action level of 4 picocuries per liter, according to the Colorado Department of Public Health and Environment (CDPHE). Levels below 4 can still carry some risk. This article is general information, not legal advice or medical advice, and it isn’t a substitute for a test.
Why the contract has a radon paragraph at all
Under C.R.S. 38-35.7-112, a buyer of residential real property has the right to be informed whether the property has been tested for elevated radon. The statute requires a contract of sale to include a bold-faced, clearly legible disclosure substantially in the form set out in the law.
The required statement names CDPHE’s recommendation that all home buyers have an indoor radon test before purchasing and that elevated concentrations be mitigated. It describes radon as a Class A human carcinogen, the leading cause of lung cancer among nonsmokers and the second leading cause overall. It also says the seller must provide any known radon test results. The Real Estate Commission is directed to adopt rules requiring the statement in contracts within its jurisdiction.
That paragraph is a required disclosure, not a finding about the home. Its presence doesn’t mean the home tested high, tested low or was tested at all. The property-specific information is in the seller’s disclosures and records, and a buyer’s own test can answer questions the paperwork can’t.
What the seller actually has to hand over
The contract or seller’s property disclosure must state any knowledge the seller has about the property’s radon concentrations. That includes whether testing has been conducted, the most recent records and reports, any concentrations detected, any mitigation or remediation performed, and whether a mitigation system has been installed. The seller must also provide an electronic or paper copy of CDPHE’s most recent brochure about radon in real estate transactions.
“Known” is the operative word. A seller who’s never tested the home isn’t required to invent a result. “No records” is an answer worth reading carefully, but it isn’t a clean bill of health. It means the records don’t establish what a test would find.
Read the disclosures and reports together. If the seller reports a previous test, ask for the report itself, not only a number written into a form. A report can identify the date, location, device or method, test conditions and person who conducted it. If there’s a mitigation system, ask for the related documentation and any test results after installation. The CDPHE real estate guidance explains the information that belongs in the transaction paperwork.
Reading a test result you didn’t commission
Many transactions involve a test someone else arranged, perhaps a previous owner. The EPA advises buyers to establish the history before deciding whether an earlier result answers the question for this purchase. Ask what previous results are available, who conducted each test (the homeowner, a licensed measurement professional or someone else) and where the sample was taken. Ask, too, whether structural changes, alterations or heating, ventilation and air conditioning changes have happened since the test.
Location matters. The EPA’s example is useful: a test taken on the first floor says little about a basement a buyer intends to finish. A result from a different part of the home, or from before a major change, may not describe the area the buyer wants to use.
If the buyer is considering accepting the seller’s test, the EPA says to confirm it followed the EPA radon testing checklist. Date, location, duration and conditions all help show whether the result applies to the home as it is now. The EPA’s radon and real estate resources provide buyer guidance for reviewing prior results.
Where in the house the test belongs, and how long it takes
CDPHE recommends testing on the lowest inhabitable level, such as the ground floor or basement, even if the basement is unfinished. Place the device on a surface two to seven feet above the floor and out of reach of children and pets. For a real estate transaction, the EPA recommends testing the lowest area that could be modified to become a living area, such as an unfinished basement.
Short-term tests commonly run 48 to 120 hours. For the test, the house needs to be closed up: exterior windows and doors should remain closed for 12 hours before the test begins and stay closed throughout the test. Normal coming and going is fine, and most heating and air conditioning should operate normally. Closed-building conditions can be easier to maintain in winter.
Long-term tests run from 91 days to a year under normal living conditions. They take longer, but they give a more representative picture of radon over time. The right test depends on the purpose and timing, so buyers should discuss the plan with the person conducting the test.
Do-it-yourself kits generally cost about $10 to $50 at home improvement stores, and CDPHE sells discounted kits. The department provides information and advice but doesn’t test homes itself. Its testing guidance explains test placement and conditions.
The people who measure and fix it are licensed
Colorado’s Division of Professions and Occupations established a radon program in 2021. The Office of Radon Professionals regulates measurement and mitigation professionals, and Colorado requires professionals performing this work to be licensed.
Before hiring, use DORA’s license verification lookup to check the individual or firm and confirm that the license covers the work being quoted. Don’t rely only on a “certified” badge in an advertisement. Measuring and mitigating are different activities: a measurement professional conducts testing, while a mitigation professional assesses and installs systems to reduce radon. A firm doing both should be able to show the appropriate license for each service. DORA’s Radon Professionals page provides program information.
What a mitigation system does, and what it doesn’t promise
A common approach is sub-slab depressurization. In plain terms, a pipe draws soil gas from beneath the home’s slab, a fan moves it through the pipe, and a vent releases it above the roofline. The work may also include sealing obvious entry points. A licensed mitigation professional can explain what system suits the home.
A system is equipment, not a warranty. It needs to keep running and be maintained. The home should be tested again after installation to confirm that the concentration actually came down. A fan or pipe by itself doesn’t prove that the result has changed.
Radon can also enter through water in some homes. The EPA treats that as a separate issue from indoor-air testing and soil-gas mitigation, and a soil-gas system doesn’t resolve it.
Putting radon in the contract on purpose
The EPA recommends that buyers and sellers address the practical details in writing. Consider where the test will be located, who’ll conduct it, what type of test will be used, and when it will happen. Set out how the parties will share the test results and test costs. If mitigation is being considered, specify when it will be done and who’ll pay for it.
In Colorado, connect the radon item to the inspection objection and resolution deadlines in the contract. It’s a line item to negotiate with a deadline attached, not an automatic deal killer. A test result or response that arrives after the objection deadline may be worth much less because the time to raise and resolve the issue may have passed. Buyers should review the deadlines in their own contract and get legal advice if they need help understanding their rights or obligations.
If an unfinished area might be finished later, testing before and after that project is wise. The EPA notes that it’s generally less expensive to install a radon reduction system during a renovation than after the work is complete. Put the test plan, timing and any agreed response into the contract rather than relying on assumptions.
New construction, and the radon-resistant question
The EPA advises buyers of new homes to ask whether radon-resistant construction features were used and whether the home has been tested. A passive system may be installed during construction, with the option to add a fan later if a test indicates a need. The feature is a starting point, not proof of the home’s current radon level.
CDPHE publishes a list of Colorado jurisdictions that require radon-resistant new construction. Whether a requirement applied to a particular home depends on where and when it was built. A new home still needs testing; age and construction features don’t replace a measurement. The EPA’s guide to buying a new home and radon explains questions buyers can ask.
If the level comes back high and the budget is tight
CDPHE runs a Low Income Radon Mitigation Assistance program with separate homeowner and contractor applications. The legislature established the program through C.R.S. 25-11-114, effective January 1, 2017.
The statute’s legislative findings say radon is odorless, colorless and radioactive; Colorado ranks seventh nationally for highest potential radon risk; all Colorado counties are at high risk; and fifty percent of Colorado homes have levels that should be mitigated. These are statutory findings, not a test result for any particular home.
Eligibility is set by the state board of health, and the program has separate application steps for homeowners and contractors. Applicants should read the current CDPHE program requirements rather than assume they qualify.
A short checklist before the deadline
- Read the radon paragraph and seller disclosure.
- Ask for the most recent test reports and the CDPHE brochure.
- Ask who tested, where the test was taken and when.
- Confirm whether structural or HVAC changes have happened since the test.
- Decide whether the previous result answers the question or a new test is needed.
- Verify the professional’s license and the work it covers.
- Write the test logistics and cost-sharing plan into the contract.
- Decide what a high result would mean for negotiations, mitigation or proceeding with the purchase; retest after a system is installed.
Closing
The paperwork identifies what’s known and what the seller must disclose. A properly planned test can answer what the existing records don’t. For a current local snapshot, bring a specific address and ask through the contact page.
Sources
- C.R.S. 38-35.7-112
- C.R.S. 25-11-114
- CDPHE: Radon
- CDPHE: Understanding Radon
- CDPHE: Testing Your Home for Radon
- CDPHE: Radon and Real Estate
- CDPHE: Radon FAQ
- CDPHE: Radon and Your Health
- CDPHE: Low Income Radon Mitigation Assistance
- Colorado Environmental Public Health Tracking: Radon Data
- DORA: Radon Professionals
- DORA: License Verification
- EPA: Radon and Real Estate Resources
- EPA: Health Risk of Radon
- EPA: Buying a New Home, How to Protect Your Family from Radon
- Contact page
The Homes and Loans Team · Misty Garman, Licensed Real Estate Broker · CO License #FA100084543 · Berkshire Hathaway HomeServices Rocky Mountain, REALTORS · 417 Main St, Canon City, CO 81212 · 719-243-0333
