A final walkthrough is your chance to check the home’s condition right before closing and confirm that the seller has done what the purchase contract called for. It’s not a second home inspection, and it doesn’t automatically give you a new right to cancel or renegotiate. What happens if you find a problem depends on the contract, any written repair agreements, and how the parties handle it.
In Colorado, the Commission-approved residential contract gives buyers the right to walk through the property before closing, with reasonable notice, to verify its condition and the included items against the contract. Read the signed contract and any amendments with the licensed broker involved in your transaction so you know exactly how that language applies to your purchase.
Here’s what to look for, and what to do if something isn’t right.
Bring the right documents
The walkthrough is most useful when you know what the seller agreed to do and what’s supposed to stay with the home. Bring or have access to:
- The signed purchase contract and any amendments.
- Any written agreements about inspection issues or repairs.
- A list of items included in the sale, such as appliances or fixtures.
- Relevant inspection notes or photographs, if you have them.
- Repair documentation the seller has provided, if applicable.
The contract and signed agreements are the reference points. Don’t assume a verbal conversation changed the written terms, because it didn’t.
In Colorado, the Commission-approved residential contract addresses a buyer’s right to walk through the property before closing, with reasonable notice, to verify its condition and included items against the contract. Review the signed contract and any amendments with the licensed broker involved in the transaction so you understand how that language applies to your purchase.
Bring the right documents
The walkthrough is most useful when you know what the seller agreed to do and what is supposed to remain. Bring or have access to:
- The signed purchase contract and amendments.
- Any written agreements about inspection issues or repairs.
- A list of items included in the sale, such as appliances or fixtures.
- Relevant inspection notes or photographs, if you have them.
- Repair documentation the seller has provided, if applicable.
The contract and signed agreements are the reference points. A buyer should not assume that a verbal conversation changed the written terms.
Red flags to check during the walkthrough
New damage or a change in condition
Look for damage that seems to have happened since you signed the contract or last saw the property. A broken window, a damaged door, a large new stain, a hole in a wall, or a ceiling mark that could mean a leak are all worth noting.
Compare what you see with the home’s documented condition, keeping in mind the contract’s terms and any ordinary wear and tear language. If something looks off, take clear photos or video and jot down where it is. Don’t guess at the cause; just record what’s visible and flag it for your broker.
Signs of water intrusion
Check under sinks, around toilets, near water heaters, and around visible plumbing connections for active drips or fresh moisture. Scan ceilings and walls for new stains, bubbling paint, or damp patches. If the home has a basement or crawlspace you can reach safely, look for signs of recent water entry there too.
A small mark can have more than one explanation, so document it and report it rather than touching or repairing anything. If you find active leaking, keep your distance from electrical equipment and let the right people know right away.
Agreed repairs that appear incomplete
If the seller agreed in writing to make repairs, walk through that list item by item. Check whether the specified work looks done and whether you can actually see the area. If the parties agreed you’d receive receipts, permits, or other documentation, confirm you have them in hand.
A walkthrough is a visual check, not a technical evaluation of workmanship. If something looks unfinished or doesn’t match the written agreement, photograph it and point to the exact language in the document. Don’t accept a casual “we’ll finish it later” at the door. If the plan changes, the change needs to be in writing.
Systems or appliances that don’t appear to work
If the utilities are on and it’s safe to do so, give the included systems and appliances a basic test. Flip the lights, run the faucets briefly, flush the toilets, and make sure an included appliance powers on. Keep it to a basic check; don’t reprogram thermostats or adjust settings beyond what you need to confirm things work.
If the utilities have been shut off, don’t assume a system is broken just because you couldn’t test it. Note the limitation and tell your broker. And if you spot a safety issue like exposed wiring or smell gas, leave the area and contact the utility or emergency service.
Included items are missing or have been swapped
Confirm the items the contract says are included are still there. Depending on your agreement, that could mean appliances, window coverings, attached fixtures, or other specified property. Sellers can remove personal belongings that weren’t included, but anything named in the contract should still be checked against its terms.
If an item is missing or looks different, document it and find the contract language that covers it. Don’t assume a “similar” replacement satisfies the deal unless the parties agreed to that swap in writing.
Leftover belongings, debris, or an unfinished move-out
Check that the seller’s belongings and trash are gone as agreed, including in the garage, storage areas, and any other spaces covered by the contract. Note anything left behind that looks hazardous or could keep the home from being delivered as agreed.
The contract may spell out the condition the property must be delivered in, so compare what you see with that language rather than your own idea of how clean or empty the house should be.
What to do if something is wrong
- Document what you see. Take dated photos or video when possible. Write down the location and a brief factual description. Keep copies of any repair records or relevant messages.
- Contact the licensed broker promptly. Share the documentation and identify the contract provision or written repair agreement that may apply.
- Notify the appropriate parties through the agreed process. The broker can help coordinate communication with the seller’s side and closing professionals, while keeping the discussion tied to the written terms.
- Ask for a written resolution. Depending on the issue and the parties’ agreement, possible resolutions may involve completing specified work, documenting a different arrangement, or addressing the issue through another written amendment. Any resolution should be reviewed and signed by the required parties.
- Don’t assume you can change or stop closing on your own. The walkthrough doesn’t automatically decide whether someone breached the contract or whether closing can be delayed. Review the contract’s deadlines, and talk with a qualified attorney if you need legal advice about your rights or obligations.
The Colorado Division of Real Estate describes inspection issues and possible resolutions in its educational materials. The specific path for a particular purchase depends on the signed contract and the facts involved.
Keep the walkthrough focused
The final walkthrough is one last condition check against the purchase agreement, not a new home inspection. A short written checklist, a few notes, and enough time before the closing appointment to raise concerns will serve you well. Leave the repairs to the seller, don’t remove anything, and don’t agree to changes on anyone else’s behalf.
If the walkthrough turns up a concern, prompt, factual communication is the most useful next step. A licensed broker can help identify the relevant documents and get the conversation moving. For more plain-language guidance on the buying process, browse the other Real Estate 101 articles, or contact The Homes and Loans Team and ask for a current look at your local market.
Sources
- Colorado Division of Real Estate: Escrow and Inspections
- Colorado Division of Real Estate: Commission Position 25, Resolving Inspection Issues
- Colorado Division of Real Estate: Contract to Buy and Sell Real Estate (Residential)
The Homes and Loans Team · Misty Garman, Licensed Real Estate Broker · CO License #FA100084543 · Berkshire Hathaway HomeServices Rocky Mountain, REALTORS · 417 Main St, Canon City, CO 81212 · 719-243-0333
