The house isn’t the buyer’s yet, but the buyer is already committed. Between the date both parties sign the contract and the date the deed is delivered, a lot can still happen to a property: weather can cause damage, a water heater can fail, a fire can occur, or the seller can stop maintaining the home. Section 18 of the 2026 Contract to Buy and Sell Real Estate (Residential) sets out how the parties handle that risk. It starts with a condition baseline, then works through property damage, failed systems and services, and condemnation. What follows explains each part and what a buyer can elect to do when the property changes before closing.
The condition baseline is the date of the contract, not the listing date
Except as otherwise provided in this Contract, the Property and Inclusions will be delivered in the condition existing as of the date of this Contract, ordinary wear and tear excepted.
The reference point is the property’s condition on the date of the contract, not when the property was listed or when the buyer first saw it. Ordinary wear and tear is excepted. A scuffed wall or worn carpet, by itself, isn’t a claim under this language.
This condition baseline is the starting point for the rest of Section 18, which addresses particular kinds of change after signing. It complements the buyer’s right to walk through the property before closing; it doesn’t replace that right. For a guide to what to check on the pre-closing visit, see the final walkthrough guide.
Big damage, and the ten percent line
Section 18.1 addresses property damage before closing. Its first part reads:
In the event the Property or Inclusions are damaged by fire, other perils or causes of loss prior to Closing (Property Damage) in an amount of not more than ten percent of the total Purchase Price and if the repair of the damage will be paid by insurance (other than the deductible to be paid by Seller), then Seller, upon receipt of the insurance proceeds, will use Seller's reasonable efforts to repair the Property before Closing Date. Buyer has the Right to Terminate under § 24.1., on or before Closing Date, if the Property is not repaired before Closing Date, or if the damage exceeds such sum.
This language does several things. First, it sets a threshold: the damage must be not more than ten percent of the total Purchase Price for the stated repair process to apply. Second, the repair must be paid by insurance, apart from the seller’s deductible. Third, the seller must use reasonable efforts to repair the property before the Closing Date. That is not a guarantee that the repair will be completed. The words “reasonable efforts” matter, and the seller’s not having insurance proceeds in hand isn’t automatically a breach.
Fourth, the buyer has a right to terminate under Section 24.1, on or before the Closing Date, if the property hasn’t been repaired by then or if the damage exceeds the threshold. The next part addresses what happens if the buyer elects to continue with the contract:
Should Buyer elect to carry out this Contract despite such Property Damage, Buyer is entitled to a credit at Closing for all insurance proceeds that were received by Seller (but not the Association, if any) resulting from damage to the Property and Inclusions, plus the amount of any deductible provided for in the insurance policy. This credit may not exceed the Purchase Price.
The credit covers insurance proceeds the seller actually received, not an amount the seller expects to receive. It excludes proceeds received by an association, adds the policy deductible, and can’t exceed the Purchase Price.
If the seller hasn’t received the proceeds, the contract describes three written routes: the parties may agree to extend the Closing Date to allow repairs; the seller may assign the right to the proceeds at closing if the approvals the contract requires come through; or the parties may agree in writing that the seller will escrow the amounts received and to be received from the sale proceeds. These are written routes. A verbal promise to “handle it after closing” isn’t one of them.
The everyday rule: failed systems and services
Section 18.2 covers failures or damage to inclusions, services, systems, components, and fixtures. The contract says:
Should any Inclusion or service (including utilities and communication services), system, component or fixture of the Property (collectively Service) (e.g., heating or plumbing), fail or be damaged between the date of this Contract and Closing or possession, whichever is earlier, then Seller is liable for the repair or replacement of such Inclusion or Service with a unit of similar size, age and quality, or an equivalent credit, but only to the extent that the maintenance or replacement of such Inclusion or Service is not the responsibility of the Association, if any, less any insurance proceeds received by Buyer covering such repair or replacement.
The scope is broad. It covers an Inclusion, a service such as utilities or communication services, a system, a component, or a fixture. That could include a furnace that quits in the last week, a water heater that lets go, a well pump, or an appliance that was working at the inspection.
The required repair or replacement is a unit of similar size, age and quality, or an equivalent credit. The contract doesn’t promise a new-for-old upgrade. The association exception matters if the owners’ association is responsible for maintaining or replacing the item. Any insurance proceeds received by the buyer for the repair or replacement reduce the seller’s obligation.
The remedy sentence states:
If the failed or damaged Inclusion or Service is not repaired or replaced on or before Closing or possession, whichever is earlier, Buyer has the Right to Terminate under § 24.1., on or before Closing Date, or, at the option of Buyer, Buyer is entitled to a credit at Closing for the repair or replacement of such Inclusion or Service. Such credit must not exceed the Purchase Price.
The buyer’s elections are termination or a credit, and both are tied to the Closing Date. The measuring point for the repair or replacement is “Closing or possession, whichever is earlier.” That’s the limit of this section: it addresses changes up to that point, not afterward.
This is different from the inspection process. A defect that existed when the contract was signed is handled through the inspection and disclosure provisions, not Section 18, which concerns a change in condition after signing. For an explanation of what a buyer can do after the inspection report, see the inspection report guide.
What counts as an Inclusion
Sections 2.5.1 and 2.5.2 describe items that the contract treats as included. Attached items are included if they were attached on the contract date: lighting, heating, plumbing, ventilation and air conditioning units, TV antennas, inside telephone, network and coaxial wiring and connecting blocks and jacks, plants, mirrors, floor coverings, intercom systems, built-in kitchen appliances, sprinkler systems and controls, built-in vacuum systems and accessories, and garage door openers.
If owned by the seller, checked items include solar panels, water softeners, security systems, and satellite systems. Other items are included whether attached or not, if on the property on the contract date, from storm windows and window coverings through fireplace inserts, heating stoves and storage sheds to carbon monoxide alarms, smoke and fire detectors, and all keys.
This list gives Section 18.2 specific items to protect when they fail or are damaged. Leased items are handled separately under Section 2.5.8 rather than treated as inclusions.
Condemnation, and why a pending action counts
Section 18.3 applies if the seller receives actual notice before closing of a pending condemnation action that may result in a taking. The contract states:
In the event Seller receives actual notice prior to Closing that a pending condemnation action may result in a taking of all or part of the Property or Inclusions, Seller must promptly notify Buyer, in writing, of such condemnation action. Buyer has the Right to Terminate under § 24.1., on or before Closing Date, based on such condemnation action, in Buyer's sole subjective discretion.
The credit provision says:
Should Buyer elect to consummate this Contract despite such diminution of value to the Property and Inclusions, Buyer is entitled to a credit at Closing for all condemnation proceeds awarded to Seller for the diminution in the value of the Property or Inclusions. Such credit will not include relocation benefits or expenses or exceed the Purchase Price.
The trigger is actual notice of a pending action, not a completed taking, so a road project or a utility easement action can matter before anything is taken. The seller’s duty is prompt written notice. The buyer’s termination right rests on the buyer’s sole subjective discretion, rather than a requirement to prove material harm. If the buyer proceeds, the credit covers condemnation proceeds awarded to the seller for the loss in value, excludes relocation benefits and expenses, and can’t exceed the Purchase Price.
The deadlines inside Section 18 are the closing date itself
Inspection, appraisal, title, and survey rights have their own entries in the Section 3.1 Dates and Deadlines table. Section 18’s termination rights instead say “on or before Closing Date.” Section 3.1 has no line item for Section 18. In practical terms, the Closing Date is the outer limit for every election under Section 18.
Section 24.1 explains how termination notice works:
If a party has a right to terminate as provided in this Contract (Right to Terminate), the termination is effective upon the other party's receipt of a written notice to terminate (Notice to Terminate), provided such written notice was received on or before the applicable deadline specified in this Contract. If the Notice to Terminate is not received on or before the specified deadline, the party with the Right to Terminate accepts the specified matter, document or condition as satisfactory and waives the Right to Terminate under such provision. Any Notice to Terminate delivered after the applicable deadline specified in the Contract is ineffective and does not terminate this Contract.
The notice must be written, received by the other party, and received on or before the deadline. Sending it by the deadline isn’t enough if it isn’t received by then. Late notice is ineffective, and the termination right is waived.
Section 20 makes time of the essence for every date and deadline in the contract. A right to terminate isn’t the same as a right to renegotiate. A party can’t create a new or different credit just by announcing one; a resolution beyond the credits stated in the contract must be agreed. For an overview of what each contingency protects, see the contingencies guide. Section 18’s rights aren’t contingencies in the Section 3.1 sense.
A separate question: can the buyer insure it?
Section 10.5 addresses the availability and terms of property insurance, with a separate deadline:
Buyer has the Right to Terminate under § 24.1. on or before Property Insurance Termination Deadline, based on, in Buyer's sole subjective discretion, any unsatisfactory provision of the availability, terms and conditions and premium for property insurance (Property Insurance) on the Property.
This is a different question with a different deadline. Section 10.5 concerns whether the buyer can obtain property coverage on acceptable terms, up to the Property Insurance Termination Deadline. Section 18.2 concerns a physical change after signing. A property with a claim in progress or an incomplete repair can raise both questions at once, and each has its own clock.
What happens after closing
Section 20.2.2 addresses seller obligations that remain enforceable after closing. Its operative language states:
In the event Seller fails to perform Seller's obligations under this Contract, to include, but not limited to, failure to timely disclose Association violations known by Seller, failure to perform any replacements or repairs required under this Contract or failure to timely disclose any known adverse material facts, Seller remains liable for any such failures to perform under this Contract after Closing. Buyer's rights to pursue the Seller for Seller's failure to perform under this Contract are reserved and survive Closing.
Section 18 gives the buyer elections before closing. Section 20.2.2 keeps a claim for an agreed repair that was never done alive afterward. That’s a reason to put the obligation in writing rather than in a text message. Damage that happens after closing is the buyer’s own property-insurance question, not a matter covered by Section 18.
Before closing
- Keep a dated photo record of the property’s condition at the inspection and at the walkthrough, because Section 18 measures change against the condition on the date of the contract.
- If something fails or is damaged, put the notice in writing to the other side through the broker, with dates, photos, and the specific item.
- Ask what has been claimed and what has been received, since Section 18.1 credits proceeds actually received plus the deductible, and Section 18.2 nets out proceeds received by the buyer.
- If a repair is agreed, get the scope in writing, because Section 25 requires any modification to be in writing and signed by the parties to be enforceable.
- Put the Closing Date on the calendar as the real deadline for every Section 18 election, not the day before.
Bottom line
Closing transfers the property in the condition it was in when the contract was signed, ordinary wear and tear excepted, with Section 18 setting out what happens when that condition changes before closing. Big damage runs through the ten percent line and the insurance-proceeds credit; failed systems and inclusions run through the seller’s repair or credit obligation; a pending condemnation action runs through the buyer’s discretion to terminate. Every one of those elections is bound to the Closing Date.
For a review of how Section 18 applies to a specific contract, contact the team.
Useful sources
- Colorado Division of Real Estate, Real Estate Broker Contracts and Forms
- Contract to Buy and Sell Real Estate (Residential), for use on or after January 1, 2026
- Colorado Division of Real Estate, Sales Contract: Understanding the Real Estate Transaction Process
- Colorado Division of Real Estate, Escrow & Inspections: Understanding the Real Estate Transaction Process
This article is general real estate education and not legal or tax advice; readers should consult their own attorney or tax advisor about their situation.
The Homes and Loans Team · Misty Garman, Licensed Real Estate Broker · CO License #FA100084543 · Berkshire Hathaway HomeServices Rocky Mountain, REALTORS · 417 Main St, Canon City, CO 81212 · 719-243-0333
